TB280FR

The Takeuchi midi excavator TB280FR is specifically designed for unrestricted working on very confined construction sites. The patented side-to-side (STS) offset boom makes this zero tail excavator more compact than a short tail excavator. Our 9-tonner manages a 360° turn with an envelope circle of only 3.220 mm. To dig at the front and load a dumper at the rear, even 2.890 mm are enough and so the TB280FR can work perfectly even in a narrow alley.

1st hydraulic circuit, with proportional control with 148 l/min High Flow
Electric refuelling pump
5 LED worklights for optimum illumination of working area
Tilt-up cab for service-friendly access to engine and hydraulic components

Download brochure

Buy or rent

Technical data
Huppenkothen added-value equipment
Dimensions
Lifting load
Quick hitch systems

General Data

Model	TB280FR
Fuel	diesel
Category	Midi-excavator (5 - 11 t),zero tail excavator
Type	cabin
Boom	mono boom
Design	zero tail
Side offset	yes
hydraulically adjustable track width	no

Weights and Measures

Operative weight	8.950 kg
Overall width	2.300 mm
Overall height	2.725 mm
Tail swing radius	1.280 mm
Shipping length (dozer blade in the back)	6.860 mm

Work performance

Motorization

Hydraulic System

Undercarriage

Technical equipment

Confort features

Security Equipment

There is additional equipment that everyone wants. You therefore get all as standard from Huppenkothen. This makes your excavator more effective, faster and more comfortable.

Hydraulic system

4 hydraulic auxiliary circuits	3 of which have proportional control
Flow rates adjustable on the display	1st auxiliary circuit: 3 memories and High-Flow Function 2nd/4th auxiliary circuit: 1 memory
1st hydraulic auxiliary circuit	with proportional control – max. 148 l/min
2nd hydraulic auxiliary circuit	with proportional control – max. 59 l/min
3rd hydraulic auxiliary circuit	for hydraulic quick change plate
4th hydraulic auxiliary circuit	with proportional control – max. 59 l/min
Detend Mode	breaker line continuous operation
Auto-Tank	depressurised return flow for breaker operation
Automatic pressure relief of control circuits when quick change plate is actuated
Hydraulic tank venting
Pilot controlled load holding valve on boom cylinder and arm cylinder
End position damping in boom, arm and swing cylinder

Cabin with comfort equipment

Comfort cabin with roof guard ROPS (ISO12117-2) / OPG (ISO10262 Level II)
Temperature-controlled air-con unit with quadruple air outlet system
Heating and radio
Suspended comfort seat
HFM (HUPPIFleemanagement)	telematics system with 2 year term of use – extended for additional charge
ECO-mode and high-altitude mode for increasing efficiency
Automatic idle – r.p.m. deceleration to optimize consumption
Sun shield
Rain guard

Technical and safety equipment

Double air filter	additional protection for the engine
Spring-loaded accumulator on parking brake
Spring-loaded swing brake
Spring-loaded accumulator on slew brake
Pressure accumulator for pressure relief of hydraulic circuits and emergency boom lowering
Storage compartment with on-board toolkit
Automated track adjuster
Acoustic overload warning device	EN474-5
LED work lights	1 x arm, 1 x frame, 2 x cab at front, 2 x cab at rear
Socket on cab roof for rotary beacon

To the front (dozer blade raised)

HUPPPlate M

Mechanical quick-change system with HUPPTilt tilt device. Also available without HUPPTilt on request.

HUPPPlate H

Hydraulic quick-change system with HUPPTilt tilt device. Also available without HUPPTilt on request.

HUPPPlate Quick

Hydraulic quick-change system with HUPPQuick quick coupling system and HUPPTilt tilt device. Also available without HUPPTilt on request.