downwards

upwards

Home / Excavators / TB2150

TB2150

With the standard rear excavator TB2150, with swivel frame and side offset, digging parallel to a wall or masonry is easily possible. The TB2150 is a 16-tonne excavator and the largest in the TAKEUCHI family, but it works lika a miniexcavator.

  • 1st hydraulic circuit, with proportional control with 224 l/min High Flow
  • Available with rubber or steel crawlers. Crawlers can be interchanged at any time.
  • LED worklights for optimum illumination of working area

Also available in the following models:

TB2150R – short-tail excavator

TB2150R V – short-tail excavator with 2-pc-boom

Download brochure

Buy or rent  
General Data
ModelTB2150
Fueldiesel
CategoryCrawler excavator (> 11 t Operative weight)
Typecabin
Boommono boom
Designstandard tail
Side offsetyes
hydraulically adjustable track widthno
Weights and Measures
Operative weight15.850 kg
Overall width2.500 mm
Overall height2.960 mm
Tail swing radius2.000 mm
Shipping length (dozer blade in the back)8.165 mm
Work performance
Motorization
Hydraulic System
Undercarriage
Technical equipment
Confort features
Security Equipment

There is additional equipment that everyone wants. You therefore get all as standard from Huppenkothen. This makes your excavator more effective, faster and more comfortable.

Hydraulic system
4 hydraulic auxiliary circuits 3 of which have proportional control
Flow rates adjustable on the display 1st auxiliary circuit: 3 memories and High-Flow Function 2nd/4th auxiliary circuit: 1 memory
1st hydraulic auxiliary circuit with proportional control – max. 100 l/min
2nd hydraulic auxiliary circuit with proportional control – max. 55 l/min
3rd hydraulic auxiliary circuit for hydraulic quick change plate
4th hydraulic auxiliary circuit with proportional control – max. 55 l/min
Detend Mode breaker line continuous operation
Auto-Tank depressurised return flow for breaker operation
Automatic pressure relief of control circuits when quick change plate is actuated
Load-sensing work hydraulics – more efficient
Hydraulic tank venting
Pilot controlled load holding valve for boom, arm and adjust cylinder
End position damping in boom cylinder
Lifting arm with 2 boom cylinders
Cabin with comfort equipment
Comfort cabin with roof guard ROPS (ISO12117-2) / OPG (ISO10262 Level II)
Temperature-controlled air-con unit with quadruple air outlet system
Heating and radio
Air-suspended comfort seat with seat heating
HFM (HUPPIFleetManagement) telematics system with 2 year term of use – extended for additional charge
ECO-mode and high-altitude mode for increasing efficiency
Automatic idle – r.p.m. deceleration to optimize consumption
Sun shield
Rain guard
Comfort equipment, technical equipment and safety equipment
Double air filter additional protection for the engine
Solid rear weight for enhanced stability
Heavy counterweight for 2-piece-boom version
Spring-loaded accumulator on parking brake
Spring-loaded accumulator on slew brake
Electric refuelling pump
Pressure accumulator for pressure relief of hydraulic circuits and emergency boom lowering
Storage compartment with on-board toolkit
Automated track adjuster
Acoustic overload warning device (EN474-5) EN474-5
Travel alarm
Rear view camera
LED work lights 1 x arm, 1 x frame, 2 x cab at front, 1 x cab at rear
Socket on cab roof for rotary beacon

To the front (dozer blade raised)

To the rear

To the side

Huppenkothen Schnellwechselsystem 1 Huppplate Mechanisch Produkt 01@2x

HUPPPlate M

Mechanical quick-change system with HUPPTilt tilt device. Also available without HUPPTilt on request.

Huppenkothen Schnellwechselsystem 2 Huppplate Hydraulisch Produkt 01@2x

HUPPPlate H

Hydraulic quick-change system with HUPPTilt tilt device. Also available without HUPPTilt on request.

Huppenkothen Schnellwechselsystem 3 Huppplate Quick Produkt 01@2x

HUPPPlate Quick

Hydraulic quick-change system with HUPPQuick quick coupling system and HUPPTilt tilt device. Also available without HUPPTilt on request.



Contact Products Locations

Contact

Products

Locations